Premio® Phoenix 2U Rackmount Server Specifications
 
Phoenix 2U Rackmount Server

• 17" x 3.468" x 24 EIA Standard 19" Rack
• Control Panel Includes Power & Reset Switch Drive power, Power On LED
• One 3 1/2" Peripheral Bay
• One 5 1/4" Peripheral Bay
• Four 1" Height Removable SCA SCSI HDD Bays
• SCSI LVD/U160 backplane (IDE version also available)
• Removable Fan Bracket Mount (2) x 80 x 80mm Long life Ball
• Bearing Fans (two installed, two optional)
• 300W ATX Power Supply

Motherboard Specifications

Processor Support

• Dual Intel® Pentium® III processors, 850MHz maximum
• Integrated 256K L2 cache
• Dual Slot 1/SECC2 CPU connector

Chipset

• Intel® 82443GX+

BIOS

• 8 Mb Flash EEPROM with Intel Phoenix* BIOS, Multiboot BBS
  (BIOS Boot Specification) 1.0 Compliant
• Plug and play, IDE drive autoconfigure, DMI 2.0, ECC/Parity support, multilingual support and jumperless processor speed setup

System Memory

• Four DIMM slots  for up to 2GB of PC100 SDRAM
• 72-bit ECC or 64-bit non-ECC
• 168-pin gold plated DIMMs

Expansion Slots (all full length)

• Two PCI busmastering slots (32 bit/33MHz) on PCI riser card

Integrated Network Adapter

• One Intel® PRO/100+ Fast Ethernet Controller (Intel 82559)
• Supports 10BASE-T and 100BASE-TX, RJ45 output

Integrated SCSI Controller

• Adaptec AIC-7896 Dual Channel: one Ultra2/LVD (80MB/sec) and one UltraWide (40MB/sec)
• Two 68-pin wide SCSI connectors
• Maximum data transfer rate: 120MB/sec (80MB/sec + 40MB/sec)

Integrated Graphics

• Integrated Cirrus Logic GD 5480 video chipset
• 2MB SGRAM video memory
• 1280x1024 maximum resolution

Integrated PCI/ISA IDE Xcelerator

• Two independent channels for a total of four IDE devices
• PIO Mode 0, PIO Mode 3, PIO Mode 4, ATA-33 and CD-ROM support
• Two stacked USB connectors

I/O Ports and Connectors

• Controller: National Super I/O 87309
• Parallel Ports: IEEE 1284, 25 pin bi-directional
• Serial ports: Two Asynch, RS-232C, 9 pin and 10-pin
• Floppy Controller: 1.44 MB, 2.88 MB, 3-Mode support
• Keyboard/mouse port: PS/2, 8240A compatible

Jumpers and Front Panel Connectors ATX Connectors

• Speaker, reset, power LEDs, HD LED, power on/off
• Jumpers: Chassis intrusion; Wake on LAN (WOL) Enable; flash configuration jumpers include: fault-resilient booting timer, boot-block protection, boot recovery, CMOS clear, password protect, BMC Forced Update

Physical Characteristics

• Server-AT, fits in most ATX 2.0 compliant
• 12" x 13"