 |
 |
|
Premio®
Phoenix 2U/T Rackmount
Specifications
 
Phoenix 2U/T Rackmount Server
-
3.469" H x 19" W x 24" D Standard 19" Rack
- Control Panel Includes Power & Reset Switch Drive power, Power On LED
- One external 3.5" drive bay
- One
external
5.25" drive bay
- Four
internal 3.5" drive bays
- SCSI LVD/U160 backplane
- Removable Fan Bracket Mount (2) x 80 x 80mm Long life Ball
- Bearing Fans (two installed,
two optional)
- 300W ATX
power supply
Certifications
Intel®
SDS2 Server Motherboard Specifications
Processor Support
- Dual Intel®
Pentium® III
processors with 512-KB L2 cache support
Chipset
- ServerWorks® Enterprise ServerSet®
III HE SL
System Memory
- Six DIMM sockets for up to 6GB of PC133 SDRAM (64-MB to 1-GB DIMMs supported, memory
must be populated in pairs)
- PC133 Registered SDRAM
72-bit ECC, 168-pin gold-plated DIMMs
- 3.3V only
Expansion
Slots
- One PCI slot (32-bit/33MHz)
Integrated
Video
- ATI® Rage XL SVGA PCI video with 4 MB of video memory
Integrated Network
- Two Intel® PRO 82550PM
Server Ethernet Controllers, supports 10BASE-T and
100BASE-TX
- RJ45 output
Integrated SCSI
- Adaptec® AIC7899 Dual
Channel SCSI Controller
- Two Ultra160/LVD channels, two
68-pin "wide" SCSI connectors. Max data transfer: 160 MB/sec
on Ultra160/LVD channel.
Peripheral Interfaces
- National
PC97317 controller
- USB:
Three stacked USB
connectors for back-panel and one for front-panel
connectivity
- Two COM/ serial ports
-
One parallel port with SPP/ECP/EPP
-
One PS/2 mouse port
-
One PS/2 keyboard port
BIOS
- 8-Mb Flash EEPROM with
Phoenix* BIOS, Multiboot BBS (BIOS Boot Specification)
1.4-compliant
- Plug and Play, IDE drive
autoconfigure, SMBIOS 2.3, ECC/Parity support, multilingual
support
- System Setup Utility (SSU)
enables easy system setup of BIOS and utilities, Plug and
Play
Jumpers and Front Panel Connectors
- CMOS clear, password clear,
BIOS recovery, BMC forced update, FRB timer disable, chassis
intrusion disable
- Power LED, power on/off
switch, reset, USB
Physical Characteristics
- SSI, fits in many ATX
2.x-compliant tower chassis
- 12" x
13"
|