|
Premio®
Phoenix 4U/133 Rackmount Server
Standard
Rackmount Configuration
- Intel®
STL2 "Tupelo" ATX Server Board
- Integrated
Adaptec U160 SCSI Controller
- Integrated Video with
4MB Video Memory
- 48X CD-ROM,
FDD, PS/2 keyboard and mouse
PHX-04 Four Bay
Phoenix Rackmount Chassis
- Three 5.25" external bays
- One 3.5" external bay
- Two 3.5" internal bays
- Lockable front plexiglass door
- Single 300W power supply
- 7" H x 19"
W x 20" D
- 30lbs. (empty)
Options
- U160 SCSI HDDs (9GB to 36GB)
- 3Com
56K data/fax modem
- Intel
PRO/100 S Server Security NIC
- Kingston DataExpress Hotswap Drive Bays
STL2
Motherboard Specifications
Processor
Support
- Dual
Intel® Pentium® III FC-PGA processors
- Integrated
256K advanced transfer cache
Chipset
- ServerWorks
ServerSet III LE
BIOS
- 8 Mb
Flash EEPROM with Phoenix BIOS, multi-boot BBS
- Plug
and Play, IDE drive auto-configure, SMBios 2.3, ECC/
Parity support, multilingual support
System
Memory
- Four
DIMM sockets for up to 4GB SDRAM (64MB minimum)
- PC133
Registered SDRAM 72-bit ECC
- 168-pin
gold plated DIMMs
- 3.3V
only
Expansion
Slots
- Two
PCI slots (64-bit/66MHz)
- Four
PCI slots (32-bit/33MHz)
Integrated
SCSI Controller
-
Integrated Adaptec®
AIC-7899 Dual Channel SCSI
controller
- Provides
separate Ultra160 and Ultra Wide SCSI channels
Integrated
Network Controller
- Integrated
Intel® EtherExpress(TM) PRO100+ 10/100 PCI
Ethernet controller (Intel® 82559)
- Supports
10BASE-T and 100BASE-TX, RJ45 output
Integrated
Graphics
- Integrated
ATI Rage IIC video controller
- 1280
x 1024 maximum resolution
- 4MB
SGRAM video memory
Integrated
IDE/ USB/ PCI to ISA/ Power Management
- IB
6566 South Bridge I/O Controller
- 32-bit
PCI master/ slave interface
- IDE
Controller with PIO and DMA modes for up to two devices
- One
USB controller and one USB hub supporting a dual external
interface
- 16-entry
I/O APIC supporting 16 PCI interrupts
- ACPI-compliant
power management with four sleep states
Integrated
Super I/O
- Controller:
National PC97317
- Parallel
Ports: IEEE 1284, 25-pin bi-directional
- Serial
ports: Two asynch, RS-232C, 9-pin and 10-pin
- Floppy
Controller: 1.44 MB, 2.88 MB, 3-Mode support
- Keyboard/mouse
port: PS/2, 8240A compatible
Jumpers
and Front Panel Connectors
- ATX
Connectors: Speaker, reset, power LED, HD LED, power
on/off
- Jumpers:
CMOS clear, password clear, processor frequency setting
Physical
Characteristics
- Server-AT,
fits in most ATX 2.0 compliant
- 12"
x 11.5"
|
