|
Premio®
Phoenix 4U FlexSERVER
Phoenix
4U Flex Rackmount Server
- Three 5.25" external bays
- Two 3.5" external bays
- Three
3.5" internal bays
- Security
design: Intrusion switch and Keylock
- PSU
type : PS/2 or Redundant 250W~400W
- 177mm H) x 422mm W x 590mm
D
- 30lbs. (empty)
Options
- U160 SCSI HDDs (9GB to 36GB)
- 3Com
56K data/fax modem
- Intel
PRO/100 S Server Security NIC
- Kingston DataExpress Hotswap Drive Bays
STL2
Motherboard Specifications
Processor
Support
- Dual
Intel® Pentium® III FC-PGA processors
- Integrated
256K advanced transfer cache
Chipset
- ServerWorks
ServerSet III LE
System
Memory
- Four
DIMM sockets for up to 4GB SDRAM (64MB minimum)
- PC133
registered SDRAM 72-bit ECC
- 168-pin
gold plated DIMMs
- 3.3V
only
Expansion
Slots
- Two
PCI slots (64-bit 66MHz)
- Four PCI
slots (32-bit 33MHz)
Integrated Video
- Integrated
ATI® Rage IIC video
- 1280
x 1024 maximum resolution
- 4MB
SGRAM video memory
Integrated Network
- Integrated
Intel® EtherExpress(TM) PRO100+ 10/100 PCI
Ethernet
- (Intel® 82559)
- Supports
10BASE-T and 100BASE-TX, RJ45 output
Integrated SCSI
-
Integrated Adaptec®
AIC-7899 Dual Channel SCSI
- Provides
separate Ultra160 and Ultra Wide SCSI channels
Integrated
IDE/ USB/ PCI to ISA/ Power Management
- IB
6566 South Bridge I/O Controller
- 32-bit
PCI master/ slave interface
- IDE
Controller with PIO and DMA modes for up to two devices
- One
USB controller and one USB hub supporting a dual external
interface
- 16-entry
I/O APIC supporting 16 PCI interrupts
- ACPI-compliant
power management with four sleep states
Peripheral Interfaces
-
National PC97317 controller
-
Two USB ports
-
Two COM/serial ports
-
One parallel port with SPP/ECP/EPP
-
One PS/2 mouse port
-
One PS/2 keyboard port
BIOS
- 8 Mb
Flash EEPROM with Phoenix BIOS, multi-boot BBS
- Plug
and Play, IDE drive auto-configure, SMBios 2.3, ECC/
Parity support, multilingual support
Jumpers
and Front Panel Connectors
- ATX
Connectors: Speaker, reset, power LED, HD LED, power
on/off
- Jumpers:
CMOS clear, password clear, processor frequency setting
Physical
Characteristics
- Server-AT,
fits in most ATX 2.0 compliant
- 12"
x 11.5"
|