|
Premio®
Phoenix 4U/T Rackmount Specifications
Phoenix
4U/T Rackmount Server
- Three 5.25" external bays
- Two 3.5" external bays
- Four
3.5" internal bays
- Security
design: Intrusion switch and keylock
-
Single 300W/ATX12V
power supply
-
Rackmount: 6.97" H x 16.63" W x 23.25" D
-
Pedestal: 16.63" H x
6.97" W x 23.25" D
- 30lbs. (empty)
Options
- U160 SCSI HDDs (9GB to 36GB)
- 3Com
56K data/fax modem
- Intel
PRO/100 S Server Security NIC
- Kingston DataExpress Hotswap Drive Bays
Certifications
Intel®
SDS2 Server Motherboard Specifications
Processor Support
- Dual Intel®
Pentium® III
processors with 512-KB L2 cache support
Chipset
- ServerWorks® Enterprise ServerSet®
III HE SL
System Memory
- Six DIMM sockets for up to 6GB of PC133 SDRAM (64-MB to 1-GB DIMMs supported, memory
must be populated in pairs)
- PC133 Registered SDRAM
72-bit ECC, 168-pin gold-plated DIMMs
- 3.3V only
Expansion
Slots
- Four PCI slots
(64-bit/66MHz)
- Two PCI slots (32-bit/33MHz)
Integrated
Video
- ATI® Rage XL SVGA PCI video with 4 MB of video memory
Integrated Network
- Two Intel® PRO 82550PM
Server Ethernet Controllers, supports 10BASE-T and
100BASE-TX
- RJ45 output
Integrated SCSI
- Adaptec® AIC7899 Dual
Channel SCSI Controller
- Two Ultra160/LVD channels, two
68-pin "wide" SCSI connectors. Max data transfer: 160 MB/sec
on Ultra160/LVD channel.
Peripheral Interfaces
- National
PC97317 controller
- USB:
Three stacked USB
connectors for back-panel and one for front-panel
connectivity
- Two COM/ serial ports
-
One parallel port with SPP/ECP/EPP
-
One PS/2 mouse port
-
One PS/2 keyboard port
BIOS
- 8-Mb Flash EEPROM with
Phoenix* BIOS, Multiboot BBS (BIOS Boot Specification)
1.4-compliant
- Plug and Play, IDE drive
autoconfigure, SMBIOS 2.3, ECC/Parity support, multilingual
support
- System Setup Utility (SSU)
enables easy system setup of BIOS and utilities, Plug and
Play
Jumpers and Front Panel Connectors
- CMOS clear, password clear,
BIOS recovery, BMC forced update, FRB timer disable, chassis
intrusion disable
- Power LED, power on/off
switch, reset, USB
Physical Characteristics
- SSI, fits in many ATX
2.x-compliant tower chassis
- 12" x
13"
|