Premio® Titan S440L Specifications

• 14.8" W x 20.4" D x 18.4" H
• Weight: 58lbs.
• Two external 3.5" and eight external 5.25" drive bays 
• Four 3.5" internal drive bays  

Thermal Solution

• Three 9cm cooling fans

Standard Features

• 40X IDE CD-ROM, FDD, keyboard, and mouse
• 3-way key lock and internal lock
• Detachable motherboard base
• Slide in/out drive rail; Detachable fan bracket; Clip in PCB standoff
• EMI clip & slot conductive spring to reduce EMI
• 300W or 400W Redundant Power Supply
• FCC B, CE, UL pending for power supply

Motherboard Specifications

Processor Support

• Dual Intel® Pentium® III processors, up to 850MHz
• Integrated 256K L2 cache
• Dual Slot 1 connector

Chipset

• Intel® 82443GX+

Bios

• 8 Mb Flash EEPROM with Intel Phoenix* BIOS, Multiboot BBS
  (BIOS Boot Specification) 1.0 Compliant
• Plug and play, IDE drive autoconfigure, DMI 2.0, ECC/Parity support, multilingual support, and jumperless processor speed setup

System Memory

• Four DIMM sockets for up to 2 GB of SDRAM (32 MB minimum)
• PC100 SDRAM DIMM
• 72-bit ECC or 64-bit non-ECC
• 168-pin gold plated DIMMs

Expansion Slots (at full length)

• Dual 32-bit PCI channels (one 33 MHz, one 66 MHz)
• Total six PCI busmastering slots:
• Two 66MHz PCI slots (downwardly compatible with 33MHz cards)
• Four 33MHz PCI slots
• One ISA slot

Integrated Network Adaptor

• One Intel® PRO/100+ Fast Ethernet Controller (Intel® 82559)
• Supports 10BASE-T and 100BASE-TX, RJ45 output

Integrated SCSI Controller

• Adaptec® AIC*-7896 Dual Channel: one Ultra2/LVD (80MB/sec), one UltraWide (40MB/sec)
• Two 68-pin wide SCSI connectors
• Max data transfer: 120 MB/sec (80 + 40)

Integrated Graphics

• Integrated Cirrus Logic GD 5480 SVGA
• 1280 x 1024 maximum resolution
• 2MB Video Memory

Integrated PCI/ISA IDE XCelerator

• Two independent channels for a total of four IDE devices
• PIO Mode 0, PIO Mode 3, PIO Mode 4, ATA-33 and CD-ROM support
• Two stacked USB connectors

I/O Ports and Connectors

• Controller: National Super I/O 87309
• Parallel Ports: IEEE 1284, 25 pin bi-directional
• Serial ports: Two Asynch, RS-232C, 9 pin and 10-pin
• Floppy Controller: 1.44 MB, 2.88 MB, 3-Mode support
• Keyboard/mouse port: PS/2, 8240A compatible

Jumpers and Front Panel Connectors

• ATX Connectors: Speaker, reset, power LEDs, HD LED, power on/off
• Jumpers: Chassis intrusion; Wake on LAN (WOL) Enable; flash configuration jumpers include: fault-resilient booting timer, boot-block protection, boot recovery, CMOS clear, password protect, BMC Forced Update

Physical Characteristics

• Server-AT, fits in most ATX 2.0 compliant
• 12" x 13"