 |
 |
|
Premio®
Titan S450N Server Specifications
Motherboard Specifications
Processor Support
- Four Intel®
Pentium® III Xeon(TM)
processors 550 MHz and higher with 100MHz system bus, 512K, 1M, or 2M
full speed L2 cache
System Memory
- 16 DIMM sockets supporting up to 4GB EDO DRAM
- Corrects single-bit errors, detects double-bit errors (using ECC memory)
- Nibble error detection
Integrated I/O
- Symbios Logic SYM53C896 dual channel SCSI-3 Ultra2 SCSI controller
- Symbios Logic SYM5353C810AE Narrow Fast SCSI controller
- Cirrus Logic GD 5480 graphics
- Single channel IDE supporting two devices
- National Super 87309 super I/O controller
- IEEE 1284, 25 pin bi-directional parallel port
- Two Asynch, RS-232C, 9-pin and 10-pin serial ports
- 1.44 MB, 2.88 MB, 3-mode support floppy controller
- PS/2, 8240A compatible keyboard/mouse port
Hot-Swap Drive Bay
- Supports six SCA 3.5" (1.0" high) drives
- SCSI Backplane SCA Connectors
- Drive Cooling with two fans attached to bay
Redundant Cooling
- Up to eleven fans
- Three fans for the electronics bay plus three for redundancy
- Two fans for hard drive bay
- One per power supply (up to three)
Peripheral Bays
- Three external 5.25"; 1/2 height (1.6")
- One external 3.5"; 1/3 height (1.0") floppy installed
Expansion Slots
- Three on PCI-A, four on PCI-B (one shared PCI/ISA on PCI-B)
BIOS
- 8 Mb Flash EEPROM with Intel® Phoenix BIOS, Multiboot BBS (BIOS Boot Specification) 1.0 compliant
- Plug-n-play, IDE drive autoconfigure, DMI 2.0, ECC/Parity support and multilingual support
- System Set up Utility (SSU) enables easy system set up of BIOS
Physical Characteristics
|
