How
do I enable or disable the onboard audio?
Hit
the DELETE key during power up to go
into the BIOS, and then go to Advanced Chipset Features. Set the OnChip Sound
feature to DISABLED. Set it to AUTO to enable it.
I've turned the system on, but I'm getting no power (i.e., power supply fan does not spin).
Make sure the cable from the case's power switch is connected properly to
the board's power on jumper; refer to the motherboard manual. Try reseating the ATX power connector to the motherboard.
Disconnect all the power connectors to your HDD, FDD, CD-ROM, etc. then
try powering the system up. Try replacing the ATX power supply.
I have two USB ports in the back, how do I enable them?
Windows NT 4.0 currently do not support USB. Windows 98/98SE, Windows 2000, Windows
Me, and Windows XP all comes with native USB drivers.
What kind of
DDR DIMMs should I use?
The motherboard only accepts PC2100/DDR266 or PC2700/DDR333 DIMMs.
Can I use just one
DDR DIMM?
Yes.
What is the system's maximum memory capacity?
It
is 1.5GB using 3 x 512MB.
Top of page
Operating System Specific Questions

Do you have a troubleshooting guide for Windows 98/98SE?
Yes, we do; please see
Premio Windows 98/98SE Troubleshooting Guide.
Do you have a troubleshooting guide for Windows 2000?
Yes, we do; please see P
remio Windows 2000 Troubleshooting Guide