I've turned the system on, but I'm getting no power (i.e., power supply fan does
not spin).
Make sure the cable from the case's power switch is connected properly to the
board's power on jumper; refer to the motherboard manual. Try reseating the ATX
power connector to the motherboard. Disconnect all the power connectors to your
HDD, FDD, CD-ROM, etc. then try powering the system up. Try replacing the ATX
power supply.
What kind of DDR DIMMs can
I use?
Use PC2100/DDR266 or
PC27000/DDR333, non
ECC, unbuffered, and
non-registered
DIMMs.
