How do I disable the onboard audio?
Go into the BIOS setup and go into Integrated Peripherals and set
the Azalia Selection option to disabled.
How do I disable the onboard LAN?
Go into the BIOS setup and go into Integrated Peripherals and set
the Onboard LAN option to disabled.
How do I disable the onboard video?
Adding a PCIe video card will automatically disable the onboard
video.
I've installed a SATA HDD and now the system won't boot up or get into the BIOS at all.
Disconnect both SATA devices first. Power up the unit and go
into the BIOS settings. Go into Integrated Peripherals and go to
SATA Device Configuration. Set the On-chip Serial ATA option to
Enhanced Mode. Save and exit the BIOS and power down the
unit and reconnect the SATA devices.
I've turned the system on, but I'm getting no power (i.e., power supply fan does
not spin).
Make sure the cable from the case's power switch is connected properly to the
board's power on jumper; refer to the motherboard manual. Try reseating the ATX
power connector to the motherboard. Disconnect all the power connectors to your
HDD, FDD, CD-ROM, etc. then try powering the system up. Try replacing the ATX
power supply.
What kind of DDR D
IMMs can
I use?
Use PC3200/DDR400, non
ECC, unbuffered, and
non-registered
DIMMs.
